Specifications
Model:
ZHWG11LM
Color:
White
Main Material:
ABS + PC
Weight:
186.5g
Dimensions:
80 x 80 x 41.5 mm
(3.15 x 3.15 x 1.63 in.)
Operating Temperature:
-10℃~+40℃(14℉~104℉)
Operating Humidity:
0% - 95% RH,
non-condensing
Input:
100 - 240V AC,
50Hz / 60Hz
Wireless Protocol:
Wi-Fi IEEE 802.11 b/g/n 2.4 GHz,
Zigbee
What's in the Box:
Aqara Hub, Quick Start Guide
CMIIT ID:
2017DP5239
FCC ID:
2AKIT-ZHWG11LM
IC:
22635-ZHWG11LM
App Support:
Apple Home app (iOS 10.3 or later), Aqara Home app (Android 5.0 or later, iOS 10.3 or later)
HomeKit compatible accessories:
Aqara Hub, Smart Plug, Wireless Mini Switch, Wireless Remote Switch (Single Rocker), Wireless Remote Switch (Double Rocker), Door and Window Sensor, Motion Sensor, Temperature and Humidity Sensor, Vibration Sensor, Water Leak Sensor, Curtain Controller, Wall Switch, LED Light Bulb (Tunable White)
* Only supports 2.4 GHz Wi-Fi network.
Aqara Hub is a control center for an entire smart home. Connecting via Zigbee protocol, Aqara
accessories can still work smoothly even if your home network is unstable or disconnected.
* Up to 32 Aqara smart accessories can be connected to the Hub.
You can use Home app to control the Hub and its connected accessories. Aqara accessories can also work with other
HomeKit-enabled accessories to provide you a smarter home.
Voice Control
Automation
Smart Home Center
Highly Secure
* To control this HomeKit-enabled accessory, iOS 10.3 or later is recommended.
* Controlling this HomeKit-enabled accessory automatically and away from home requires
an Apple TV with tvOS 10.2 or later or an iPad with iOS 10.3 or later or a Home Pod set up as a home hub.
HomeKit technology provides advanced
security with end-to-end encryption and
authentication. Data related to your home
is encrypted and stored in the keychain
of your Apple device. It's also encrypted
in transit between your Apple device and
the acessories you're controlling in your
home.
You can control Aqara accessories with Siri on your iPhone, iPad, Apple Watch or HomePod.
Just say “Siri, I’m home”, and the lights can automatically turn on for you.
Along with Other Aqara Smart Accessories
to Create Various Scenes out of Your
Unlimited Imagination
When motion is detected in the evening, the Hub light automatically turns on.
Hub
Motion Sensor
With a press of the Wireless Mini Switch, the Hub plays your preferred ringtone.
Hub
Wireless
Mini Switch
With the Door and Window Sensor, you can turn on alarm mode when you leave the house or when you are asleep. If a door or window is opened, the Hub will sound an alarm and send a notification to your phone.
Hub
Door and
Window
Sensor
One button, all accessories under control.
With the Wireless Remote Switch, set your own night mode and turn off all the lights with a click of the button.
Hub
Wireless
Remote Switch
Link the Smart Plug with a humidifier to improve indoor humidity.
Hub
Temperature
and Humidity
Sensor
Smart Plug
With the Water Leak Sensor, when a leak is detected, the Hub will sound an alarm and send a notification to your phone.
Hub
Water Leak
Sensor
With the Aqara Home app (iOS or Android), you can control your home from almost anywhere at any time.
Aqara Hub adopts one body shell design and uses NXP i.MX6 CPU, 256M DRAM, 256M flash, and an
MFi chip. It has two high gain built-in antennas. By utilizing FR-4 PCB with a large area ventilated base,
the ventilation creates an airflow from front to back, increasing the heat dissipation and ensuring the
Hub's reliability over time.
Connect the Hub to
power supply.
Open the Aqara Home app,
press “+” in the upper right
corner to add the Hub.
After the Hub is successfully
added, add remaining Aqara
accessories as needed.